Home                        

 

VTT® Lifting Belt Slings

 

Lifting Belt Slings Duplix

Extremely tough for progressive lifting!

With the new generation of the lifting belt

slings from VTT®  you can lift loads of

up to 50 tons absolutely safe - according

to EN norms EN1492-1/2 with a safety factor

of 7:1. This truly outstanding development is

based on a new manufacturing technology

with a totally new construction allowing a

larger lifting area of the belt with

shortened soft eyes.

Lifting capacity up to 100 tons!

The strength core is protected by a highly

abrasion and cut resistant protection sleeve.

This assures - in combination with a

construction of the carrying surface without

hard edges - double the service life of normal

lifting slings: especially for the lifting of

materials with sharp edges such as steel- and

aluminium coils, steel pipes, steel bars, plates,

prefabricated walls and conrete based building

elements. Customers, once used VTT‘s

Lifting Belt Slings, swear, never to change to

„antiquated“ round slings again!

More Safety with „Safety Stitch

Polyester slings function with a comfortable

3% dynamic stretchfactor but will carry

loads at full capacity up to 13% before

breaking. The innovative VTT® Safety

Stitch is set to pop when the sling is stressed

to over 8% elongation. In cases of overload,

jerk loading, or fatigue after extended use, the

unique Safety Stitch warning feature reveals

stretch beyond rated capacity before any

weakening of the load bearing fi bers, while

the load is still safe. If broken, the Safety Stitch

warning is clearly visible without any threat

to load or operating personnel. At this point,

the sling is still able to carry its full rated load.

If the Safety Stitch is broken, the sling should

be taken out of service immediately.

 

Multi Channel Technology

Patented MultiChannel cover construction provides

superior cut and abrasion resistance. Load-

bearing fibers are completely encased. Innovative

industrial weaving builds tubes as fabric is woven,

completely eliminating critical stitching.

Due to their soft construction (up to a width of

600mm!), MultiChannel – slings will not point load!

This technology was especially developed for

lifting exclusive goods like boats, pipelines, turbines.

 

The high resistable protection cover is one of the

most important elements that enables long term use

of these slings. The cover cloth is double-woven with

inner black layer to reveal excess wear and as an

additional UV barrier. Long term wear is revealed

when the black layer shows through, but even then,

load bearing fibers have not yet been exposed.

When lifting goods with sharp edges, we recommend

the use of tubular wear pads from VTT®.                             Top of document

 

 

 

Brochure: Lifting Belt Sling Duplix (pdf)